- 1
- 2
- 3
- 4
- 5
plastic slider block, uhmwpe slider block, UHMW slider block
| ≥500Kilograms | US $3.00-$9.00 |
Basic Info
Product Description
plastic slider block, uhmwpe slider block, UHMW slider block
; uhmwpe slider blockPlastic HDPE Spacer block/ HDPE Tube cutting spacer /HDPE Spacer
customized high density UHMWPE plastic spacer of pipe
Plastic pipe spacer /plastic pipe support /UHMWPE
impact resistant uhmwpe pipe clamp , piper spacer , uhmwpe wear shoe
UHMWPE oil Pipe line support and plastic pipe spacers
UHMWPE plstic pipe sapcer plastic pipe support
Specifications
UHMW-PE plastic pipe support:
1. Wear resistant
2. Corrosion resistant
3. ISO9001
UHMW-PE plastic pipe support
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
plastic slider block, uhmwpe slider block, UHMW slider block
D. A parameter table for UHMWPE
Property | ASTM Test | Units Metric (US) | Typical Values |
Specific Gravity | D792 | gm/cm° | 0.926-0.934 |
Tensile Strength @ Yield | D638 | MPa (PSI) | 21 (3100) |
Tensile Strength @ Break | D638 | MPa (PSI) | 48 (7000) |
Elongation @ Break | D638 | % | 350 |
Young's ("E") Modulus (23°C) | D638 | MPa (PSI 105) | 690 (1.0) |
Young's ("E") Modulus (-269°C) | D638 | MPa (PSI 105) | 2970 (4.3) |
Izod Impact Strength (23°C) | D256(1) | J/m (ft-LBS/in notch) | 140 (30) |
Izod Impact Strength (-40°C) | D256(1) | J/m (ft-LBS/in notch) | 100 (21) |
Hardness, Shore "D" | D2240 | - | 62-66 |
Abrasion Resistance | (2) | - | 100 |
Water Absorption | D570 | % | Nil |
Relative Solution Viscosity | D4020 | dl/gm | 2.3-3.5 |
Density |
| (lbs./cubic in.) | .034 |
plastic slider block, uhmwpe slider block, UHMW slider block
UHMW-PE pipe line support description
UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite that UHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.
B. Characteristics for UHMW-PE plastic pipe support
1. UHMW exhibits virtually no water absorption
2, Non-Toxic
3. Low coefficient of friction
4. Corrosion resistant
5. Abrasion and impact resistant
6. Wear Resistant
7. Dielectric
8. Weatherproof
UHMW-PE Application Areas
1. Textile Industry:
2. Chemical Industry:
3. Food Processing Industry:
4. Paper Industry:
5. Material Handling:
6. Farm Implement:
7. Mining & Metals Processing Industries:
8. Transportation:
9. Consumer Products:
10. Waste Water Treatment:
Application of pipe line support :
1. Urban tap water pipe network system
2. Replaceable cement tubes, iron pipe and steel tube
3. Industrial materials duct
Chemical industry, chemical fiber, food, forestry, pharmacy, light industry and papermaking, metallurgical and other industrial raw material conveying pipe.
4. Landscaping water supply network
Landscaping needs lots of water pipe, toughness and low cost of UHMWPE pipe make it become the best choice.
5. Sewage discharge pipes
UHMWPE pipe have unique corrosion resistance, can be used in industrial wastewater, sewage discharged pipe,low costs and maintenance costs .
6. Transport ore, mud
UHMWPE pipe has high resistance to stress and wear resistance, can be widely applied in conveying ore, coal ash and river bait-casting mud.
7. Agricultural irrigation pipe
Iinside sleek, great flow, cross road construction and good impact resistance make UHMWPE Pipe the ideal tool for agricultural irrigation.
A parameter table for UHMWPE
Property | ASTM Test | Units Metric (US) | Typical Values |
Specific Gravity | D792 | gm/cm° | 0.926-0.934 |
Tensile Strength @ Yield | D638 | MPa (PSI) | 21 (3100) |
Tensile Strength @ Break | D638 | MPa (PSI) | 48 (7000) |
Elongation @ Break | D638 | % | 350 |
Young's ("E") Modulus (23°C) | D638 | MPa (PSI 105) | 690 (1.0) |
Young's ("E") Modulus (-269°C) | D638 | MPa (PSI 105) | 2970 (4.3) |
Izod Impact Strength (23°C) | D256(1) | J/m (ft-LBS/in notch) | 140 (30) |
Izod Impact Strength (-40°C) | D256(1) | J/m (ft-LBS/in notch) | 100 (21) |
Hardness, Shore "D" | D2240 | - | 62-66 |
Abrasion Resistance | (2) | - | 100 |
Water Absorption | D570 | % | Nil |
Relative Solution Viscosity | D4020 | dl/gm | 2.3-3.5 |
Density |
| (lbs./cubic in.) | .034 |
Packaging : pallet packing or as client need.
XINXING can provide various UHMWPE & HDPE products with the good quality at reasonable price according to your requirement.
Any questions, please feel free to contact us.
Many thanks for you visit us !
poly pipes spacers plastic spacers for 13mm poly pipes
hdpe duct spacers HDPE Conduit Spacer
poly pipes spacers plastic spacers for 13mm poly pipes
hdpe pipe spacer
pipe support pe
OEM plastic pipe clamps
UHMWPE Plastic Pipe Clamp
UHMWPE pipe support
hdpe pipe support
plastic pipe support
pipe support
customized high density UHMWP plastic spacer of pipe
Ultra molecular weight UHMW virgin wear PE spacer for pipe
UHMWPE plastic spacer for pipe
high density HDPE polyethylene plastic spacer for pipe
plastic pipe spacers
UHMWPE oil Pipe line support
UHMWPE plastic spacer for pipe / high density HDPE polyethylene plastic spacer for pipe
Abrasion resistant white virgin UHMWPE Pipe support blocks
UHMWPE or HDPE Pipe support Block
uhmwpe support block for pipe saddle and plates
UHMWPE pipe support in uhmwpe material, Pipe support, UHMWPE pipe support
Plastic uhmwpe support block for pipe saddle and plates
Related Products from This Supplier
corner pad for marine fender cover/ coner marine fender pads for jetty/fender pad for marine